Wood powder machine is a kind of equipment, in the long use of the process, because of its own quality, operators and other causes of some problems. There was no device that would have failed. But after the problem, we should learn to deal with, so as to deal with practical problems, improve the utilization rate of wood powder machine.
1. Check the fineness of raw materials first. If the damaged articles are too large or too wet, if too large, it should be broken through the wood crusher, and then enter the destruction. If it is too wet, it should be dried first and then destroyed.
2. If the fineness is too high, should be removed three conditioning plate (attached: conditioning host damage chamber plug some, plug files have six conditioning plate, conditioning plate more, fineness higher; other conditioning some can callback set, such as closer to the damage chamber, the fineness of the lower. On the contrary, the higher the fineness. )
3. Plug room conditioning, should cooperate with the screening machine, screening products and semi-finished products. The discharge should be made of 60% products. 40% semi products. Highest output value.
4. The exhaust cloth bag should be tremble before starting of each class, so as to make the air bag well ventilated. The output reached the highest. The casing doesn't show heat.
5. The feed should be uniform, so that the motor of the wood powder machine is not overloaded. To extend the service life of wood powder machine.
