With the mass production of waste tires, not only occupy our space, but also had a certain impact on the environment. In order to solve these waste tires, the shredder manufacturers produce a tire shredder to tear and recycle the used tires. The tire shredder equipment on the market by a lot of users. However, when the equipment is not used, the tire shredder storage, making many users feel a headache.
1. Maintenance work before storage: Tire shredder long-term storage, the mechanical maintenance, repair damaged parts, and to thoroughly clean up, keep the technical condition is good. Tire shredder should be mechanical fuel lever placed idle position, the joystick placed in neutral position.
2. Storage location and environment: Tire shredder parked in a dry room. Had to stop outside, should be elected flat ground and planted wood. Cover with cover cloth after parking. Tire shredders arranged at the airport and the layout, should ensure that any one of the machinery out of access are not affected by other machinery.
3. To prevent rust: Before storage, should be depending on the size of the outer surface of the anti-rust paint patent leather shedding to determine whether to use paint repair or re-painting the whole machine to repair. Construction machinery working equipment, such as paved screed, loader bucket, scraper, etc., on the bare metal rust is smear butter.
4. The storage battery: Should remove the battery, the battery is placed in the dry and antifreeze Department. To keep the surface clean and dry, it is forbidden to place conductive objects on the battery. Here to remind users to remove the battery, you must first cut off the negative line, and then cut off the positive line; install the first positive line to connect, and then connect the negative line. Lead-acid batteries should be charged once a month.
5. The engine storage: let go of the engine cooling water, replace the engine oil. The new oil is usually neutral, does not corrode the metal parts of the engine, the fuel tank filled with diesel to avoid rusting the fuel tank. If possible, should also be added preservatives, should be shut down during the engine should be started once a month, the mechanical travel for a short distance, the lubrication of the parts to create a new film, to prevent rust. It should be noted that before starting the cooling water should be filled, the end should be depleted of cooling water.
