Shredder noise in the work situation is because of the normal collision of materials, accompanied by vibration. These vibrations create long-term friction between machine parts. It is quite common for the machine to loosen the screws on the machine after working for a while. We must know that there is data on the installation height and angle of the fan. The same is true for the air inlet and the air duct. There should not be too much deviation. The strong twist is not sweet and the height of the hard change is really not good. Rubber shredder to the plastic or rubber shredded into small particles, these waste can put them into the extruded and then melt out of the use of extrusion, there is a key is to shred the smashing materials used for feeding rubber garbage particles must be Small enough, because the process before the extrusion granulation process to the tire and other rubber products first broken, people's lives are inseparable from the car, and therefore have a lot of tires rubber garbage, the tire recycling is a very Large market, double-shaft shredder in operation is driven by the motor to work, not the same type of shredder configuration motor power is not the same, big is spoiled, small is not moving, So easy to burn the motor, and the production of shredders form a lot of trouble, so do not underestimate the choice of shredder motor is also very important.
