The question of safety has always been the question we have always valued since ancient times, because safety is directly related to human life. But how can we ensure the safe production of wood shredder during its production? The following professional manufacturer of wood shredder manufacturers Shuguang Zhengzhou Heavy tell you the following points, Paul you do the "safest."
The first is the device should be carefully checked after installation is not in place to see if the device is not strong enough. Motor shaft and mill shaft is not parallel, together to see the belt tension is not appropriate. This is the equipment before the start of rolling the rotor by hand to see if the work is sensitive and normal, the case without collision scene, the rotor is not the right direction of rotation, the motor and the grinder are not outstanding, such as after the launch should start First idling for 2 to 3 minutes; then the wood shredder to feed evenly, if there is noise, bearings and the body temperature is too high or spray out the scene, etc., should immediately shut down to view and troubleshoot. The last is the feed, and then when the time of production should stand next to the wood shredder to prevent the debris was bounced back injury. When smashing long stems can not grasp too tightly to prevent the hand was brought.
