We all know that the metal shredder is mainly composed of a mechanical part and an electric part. The electric part includes a motor and an electric frame. The mechanical part consists of a frame, a speed reducer, a bearing box and a rotor. The rotor of the metal shredder is mainly composed of a bearing support. Because the rotor is composed of a variety of parts and equipment, if you use or improper maintenance will induce multiple failures, including bearing damage, rotor imbalance, fan blade damage is a common fault. Shuguang Machinery solves the common problems of metal rotor shredder rotors today to solve problems for users.
Metal shredder on the common fault bearing is generally bearing clearance is too large, locked, run jacket, run the inner sleeve and bearing chipping and other issues, running inside the sleeve can be solved on the bearing rush points, for some running jacket, The gap is slightly larger, you can pad some thin metal repair, or replace the chassis; gap is not too large, you can try to solve the adhesive to solve the problem; but the bearing clearance is too large, locking, bearing fracture and other issues These failures are irreparable and require the replacement of new bearings. Wind blade damage is generally a small problem of deformation or loosening. Iron blade deformation can be corrected with a pair of pliers. If the blade and the shaft are loose, you can use a multi-purpose adhesive to fix the adhesive, but for the wind blade Fragmented, only new. With respect to the imbalance of the rotor of the metal shredder, there are generally two problems. One is the mass eccentricity of the rotor system, that is, the problem of the manufacture and installation of the rotor; the second is the damage of the components of the rotor. The first of these is the quality of the rotor, which may be caused by problems such as uneven material, assembly errors, and manufacturing errors during the manufacturing process. This is an event of force majeure. Replace the rotor with a new rotor. There are many reasons for the damage. In the operation of the rotor and may cause corrosion, wear, dirty scaling and fatigue operation of various parts, this requires the user to pay more attention to the maintenance and maintenance of the various parts of the rotor.
