The normal use of metal shredder reduces the occurrence of failures in all scrap metal and crushing of waste materials. The shredder is a well-deserved king's choice. It is called omnipotent because of its wide range of shredding. Large to the car shell, small to the barrel cans, soft materials to the plastic bags difficult to break, or the material used both hard and soft tires, etc., metal shredder can be competent, and the size of shredded materials Adjustable, users can adjust the discharge size as needed. The metal shredder pays attention to daily maintenance. Normally, it will not cause any failure, unless the machine is used for a long time. But users also need to know that routine maintenance must be done properly. For example, lubricants, some users only know how to add lubricants on time, but do not care about the quality of lubricants. If you add these inferior lubricants, Through the operation of the machinery, the poor oil of these oils will fill the entire machinery and equipment. With the long-time operation of the machinery, the heat will accelerate the volatilization of the oil. The mechanical movement will drive the friction. These friction parts will be easily adsorbed and evaporated. Oil, these oils are more corrosive. Sometimes we will see that someone cleans the engine with kerosene, which is to use the corrosive nature of kerosene. The electronic components inside the mechanical equipment can not resist this kind of corrosion. The time is long. Various failures will occur, such as mechanical noise, poor contact and so on. Therefore, we choose to use better-quality lubricants so that we can maintain your trouble-free daily maintenance and the chance of mechanical failure will be much less.
