As for the wood shredder, the wood is relatively simple to shred. Therefore, in the case of notifying the work, the load will also increase. In the wood occupation, the raw material of the wood is also relatively different, so the fit will occur. Shaking, so when using different screens, it has a great impact on the load of the shredder. When the screen with a sieve diameter of 1.2 mm is used, the motor capacity should be 40 kW; when using a sieve with a sieve diameter of 2 mm, the motor capacity should be 30 kW; when using a sieve with a sieve diameter of 3 mm, the motor The capacity should be 22 kilowatts, otherwise it will cause certain dross. The method for overloading the wood shredder has its own way to detect it:
The level of material in the cavity is directly indicated by the contact level gauge, ie, the load is known. The belt conveyor weighs the amount of the wood shredder feeding belt conveyor. Destructed by calculation and screened for the closed loop system's cyclic load.
The current value in the motor circuit of the wood destroyer is detected, and the current during the operation of the destroyer is generally controlled at about 85% of the rated current. In the case of multi-stage damage, only the final stage of damage to the final product is detected. The damage machine is usually in a closed-circuit system, and the amount of the damage includes the amount of damage and the cyclic load in early years. The selection of wood shredder is based on the customer's wood raw materials. If you have a lot of waste wood around, you can come to our Dawning Machinery to choose the right wood shredder equipment for us to achieve better benefits for you.
