Metal shredder is important equipment for the recycling of scrap metal. If there is a failure during production, the production efficiency of the equipment will be reduced. With proper maintenance and maintenance, such a situation can be effectively avoided. Reasonable maintenance and maintenance can not only Effectively improve the working performance of the equipment, but also improve the service life of equipment and reduce the wear and tear of accessories. Here are some of the most practical and reasonable ways to maintain and maintain the metal shredder.
Before the metal shredder works, check the equipment to see whether the bolts of the equipment are loose and if there is any surplus material in the machine. When everything is normal, it is ready to work and then the operator can't leave without authorization. When it comes to the delivery of materials with protective measures, and when entering the material to check whether there are other impurities in the material, if there is a need to promptly clear and then feed the production, if the equipment has to stop after the inspection In the end, when the work is completed, the materials must be discharged first and then the equipment must be shut down. The development of good habits can not only reduce equipment wear, but also maximize the capacity of the equipment.
Do a good job of maintaining the metal shredder from the usual start, first in the operation of the equipment should pay attention to the situation of the material, such as the material's humidity, hardness is mingled with impurities, etc., then the equipment should be cleaned after the end of the work, And check the wear of each accessory. When doing regular maintenance, pay attention to the choice and addition of lubricating oil. Regularly adding lubricating oil can not only reduce the direct friction of various parts, but also improve the working efficiency of the equipment. Therefore, when the equipment is used for a period of time, it must be maintained in time, not only This equipment brings more value to the company and can effectively increase the service life of the equipment.
