Wood crusher should pay attention to the following issues during use:
1. The wood crusher can ensure that the chassis is stable and the lines are connected properly. It can start work, and then do not rush to discharge. Look at the damage machine is not a normal job. At this moment, it is possible to investigate the sound of the destruction machine is not normal. Whether the noise is too large or if the starting time is too long or not, under certain conditions, it may be detected whether the starting current is normal or not.
2. In the investigation of the work of the wood crusher completely normal conditions gradually began to discharge, discharge time to investigate the feed is not normal, when the time to invest in wood should pay attention to the balance of speed and stability, and other according to the wood lumber The size and boring degree to determine the speed of feeding, such as wood with a higher moisture content, the rate of investment is slower, in fact, we advocate that the wood should be dried as much as possible drying or drying in the future and then destroyed.
3. Continued steady feeding is an important factor in the resolution of the working power. In the case where the machine and the surrounding wood are fixed, safe and continuous feeding can improve the unit output value of the wood crusher.
4. The wood should be dried as much as possible. The wood with too much water content will directly affect the destructive power of the wood crusher. This has been analyzed before.
5. Wood should ensure that pure iron-free stone blocks and other impurities, or wood mill blade, hammer drying nets and other formation of certain hazards.
