Scrap handling is currently the country's key energy-saving and emission-reducing project that is mainly addressed and strongly supported. Scrap crusher is the key equipment for scrap steel processing. With the continuous increase of scrap resources, scrap crusher has a good application prospect. The machine is supplied by the manufacturing factory after being assembled into a platform. When the user receives this note, it is checked to eliminate the possible drawbacks that may occur during transportation.
Due to the large amount of vibration during operation of the machine, it is recommended that the machine be installed on a concrete foundation. In order to reduce vibration, noise, and absorb vibration to prevent the vibration generated during the operation of the machine from affecting the foundation of the building, it is better to be in the middle of the crusher and the concrete foundation. Pad with hardwood pad, rubber band or other damping material. The weight of the foundation can generally be taken as 5-10 times of the weight of the machine. The depth of the foundation should be greater than the depth of the freezing of the land. The installation of the machine and the position of the screw. Before adjusting the discharge opening, loosen the tensioning spring. After adjustment, adjust the tension of the spring to prevent the bracket from falling off during operation.
