With the rapid development of society, the use of metal products can be seen everywhere in our lives, and these metal products eventually escape the fate of damaged, metal crusher is used to break the scrap metal equipment, after the broken material is not only easy to recover, but also to reduce the area of land and transportation costs. Use, however, as a mechanical equipment, in the work will inevitably appear some problems, the following is to analyze some of the metal crusher will appear in the work of the common problems, and such problems should be solved.
If the blockage occurs, it is usually these reasons, the feeding speed is too fast, the breaker's runic load is large, and the blockage may eventually lead to the occurrence of the situation. Second, if the bearing is overheated, it is because the lubricating oil is not fixed on time, because the equipment is working mainly by the bearing operation when the equipment is working. If the lubricating oil is not injected in time, the society will have difficulty in running, and it will also appear wear and tear and add water. Lubricating oil can not be excessive or too small. Only a suitable amount of lubricating oil can play a role in lubricating and protecting bearings.
