Crusher wear into the wear is unavoidable which mechanical equipment used in the process, especially in the use of the crusher, due to its special production work, wear is very obvious, the devices wear faster, more serious damage to the case, it will seriously influence the whole production process. Is the production line production efficiency is greatly reduced. The wear of the crusher equipment is pided into two main aspects.
Natural wear: Usually refers to the change of geometry and size structure of parts and components caused by the friction between parts of machine during normal operation and operation of machinery. This part of the wear is usually slow, and the damage will not be caused in the short term. But because the device will increase the wear and mechanical contact gap between parts, after long time wear should work together with the combination of components, due to wear and tear caused the increase of the gap, not enough good combination, this will seriously affect the crusher production efficiency of equipment at the same time, if not timely replacement wear the device under the condition of serious or even lead to other parts of the damage, caused by damage to the crusher equipment more.
Premature wear:It is mainly due to the unreasonable structure of the machine, the poor quality of some parts, the quality of some parts, the incorrect installation and the wrong equipment operation. After multiple analysis, it is concluded that the crusher is a heavy industrial equipment, and the wear and tear caused by wear is relatively large. Therefore, we need timely maintenance and replacement of various worn parts in the crusher. Only when we find problems better and deal with them in time can we better guarantee the high efficiency and normal safety operation of crushers.
