The ultra-fine grinding mainly depends on the grinding roller pressed tightly on the grinding ring under the action of the centrifugal force to achieve the effect of grinding. Even if the grinding roller and the grinding ring are somewhat worn out, as long as it is within a certain range, it will not affect the finished product. The yield and fineness. As long as the grinding roller and ring are selected for the material, the replacement cycle will be prolonged. We have to regularly inspect the grinding wheel grinding ring and find that the wear is severe and we need to replace it in time to avoid damage to the equipment. Of course, the selection of pre-roller and mill ring is very important. Selecting a mill roll ring with better material wear resistance will prolong its service life, thus reducing the production cost. The mill roll grinding ring is used. The finest alloy materials create truly durable wear.
Bearings, bearing damage is also one of the common faults, long-term operation of the equipment or long-term overload operation, may cause fatigue and damage to the bearing; when the micro-fine grinding bearings have some minor problems, they are not repaired in time or This is not completely troubleshooting will shorten the bearing life. We also need to pay attention to the lubrication of the bearings, do maintenance for the bearings on a regular basis, and also pay attention to the changes in the bearing temperature after the equipment is running. These factors will cause fatal injuries to the bearings. Therefore, we must regularly check and select the appropriate type of bearings. Replace the bearing.
In the process of installing microfine grinding, since all parts are new, it will inevitably encounter some problems during the reinstallation process, so it is necessary to find a skilled installation worker to avoid a lot of trouble, especially the multi-bearings. The installation, when installing bearings, skilled workers will accumulate rich experience in the long-term accumulation, reduce the risk of component damage during the installation process.
