How to adjust Raymond mill equipment out of powder particle size is too large?

The powder is mainly lies in the actual production of Raymond Mill powder in effect, bring fully abnormal need to make appropriate adjustments to the Raymond Mill equipment. In order to solve the problem that the pulverized particles of Raymond mill are too big in production, we need to carry out more comprehensive equipment testing and find the correct solution.

The size of pulverized powder directly affects the price of the finished powder and has a direct effect on the production efficiency. In actual production, we need to adjust the operation state of the equipment to the best according to the more scientific mode of production. According to the actual production experience, we need to enter a more safe and effective method to reasonably adjust the particle size of the powder. In order to find the size of the powder, it is necessary to pay attention to the operation principle of Raymond mill first, and to find a solution according to the actual principle. The working principle of the equipment material is crushed to the desired size, by the elevator will be sent to the material storage hopper, then through the continuous vibrating feeder will feed evenly into the grinding chamber of Raymond mill host, due to the centrifugal force in rotation, the roller swings outward, tightly pressed on the grinding ring, shovel material to the grinding roller and grinding ring for roll grinding roll and achieve the goal of crashing.

So the actual adjustment can be better handled for this situation. The grading effect is introduced in the model of the mill, and the graded return sand is directly returned to the entrance of the mill. Adjust the axial speed properly and adjust the grain size of the powder. At the same time, proper adjustment of the main engine's rotation speed, proper adjustment of grinding time and adjustment of speed can increase the efficiency of milling, and further roll the larger particles to achieve a good milling effect. The non first-order crushing rate and the crushing rate increase with time, so that the grain size and the milling time can be adjusted more accurately, which will make the whole production more efficient. To ensure high quality particle size and control the fineness of pulverized coal in the effective range, we can better adjust the effect of Raymond mill, make the production of the machine more efficient and ensure the overall quality of the equipment.