The conveyor of the wood shredder is composed of a bracket, a bracket, a flat belt roller, a motor, a large gear, a pinion, a conveyor, a belt and a roller. In the work, conveyor deviation is one of the common causes of wood shredder equipment, how to solve this problem?
There are many reasons for the deviation of the conveyor of wood shredder, which need to be dealt with differently according to different reasons. When the conveyor adjusts the belt of the supporting roller group, the position of the supporting roller can be adjusted according to the deviation, and the holes on both sides of the supporting roller group can be installed to process the holes for adjustment. The concrete method is: the belt of the wood shredder deviates to that side, which side of the belt of the conveyor idler group moves forward, or the other side moves backward, and the conveyor belt deviates upward, then the lower part of the idler group should move to the left, and the upper part of the idler group should move to the right.
