For the metal shredder in the use of some of the details and attention to realize the operator must be aware of, ignore any one of the details may have a certain degree of impact on the metal shredder and production.
In the process of feeding, the metal shredder must feed evenly. If it is too fast, it may cause obstruction of the equipment, thus affecting the normal operation and use of the shredder.
In the process of feeding, always pay attention to the ammeter pointer deflection viewpoint, if it exceeds the rated current, motor overload, long overload, will burn the motor. This situation should be immediately reduced or closed the gate, you can also change the feeding method, through the addition of feeders to control the amount of feed.
If the outlet pipe is not smooth and the feeding is too fast, the air inlet of the uniaxial shredder will be blocked; if the conveying equipment is not properly matched, the outlet pipe will be blocked after the air weakening and the live seamless. After checking out the faults, we should first clean up the feeding port to change the mismatched conveying equipment, adjust the amount of feed, so that the metal shredder can return to normal operation.
Tel : 0086-371-67666660 E-mail : Admin@sgzgchina.com Cel : 0086-13523465141