What should we do when the blade of the shredder is worn? The grinding method of the cutter on the tear machine is different from that on other equipment. The design of the cutter on the tear machine is special. The design of the multi-claw blade makes it impossible for the grinder to grind it. A single blade grinding will cause excessive clearance between blades and seriously affect the use. Other types of mechanical inserts are basically grinded or grinded.
Then how should the cutter of the shredder be grinded? As the main component of the shredder, considering that the shredder blades often tear dozens of waste products in operation, the shredder blade edge wear is very complicated. Once the two-axle shredder tool with blunt after the tear will become very poor, this time it is necessary to replace the spare tool, the blunt knife removed to grind. The grinding of the blade of the shredder is different from the grinding of other cutters. Other types of mechanical blades are basically grinding the surface or the edge of the blade with a grinder. Because of the special structure of the cutter, the grinder can't grind the multi-claw blade because of the planning of the multi-claw blade. However, the single surface grinding of the blade will cause the gap between the blades to be too large, which seriously affects the application.
Tel : 0086-371-67666660 E-mail : Admin@sgzgchina.com Cel : 0086-13523465141
