Maintenance of life garbage shredder when suddenly stopped:
1. If there is a sudden shutdown accident, the power supply must be cut off immediately to avoid other accidents in operation and production.
2. See if there is blockage at the discharge port. Operators must strictly follow the instructions. Do not blindly feed to the domestic waste shredder in order to catch up with the work, so as to avoid exceeding the load-carrying capacity of the machine. If material blockage occurs, it is necessary to stop the machine in time to remove the blockage at the discharging port of domestic waste shredder to ensure smooth discharging.
3. Check parts frequently: When the machine is working normally, it is necessary to check the parts of the machine frequently, such as the tightness of the triangle belt, the wear and heat of the bearing, the wear and tear of the cutter, the aging of the circuit and the breakage of the line, etc.
4. When the voltage is too low, the power supply should be cut off immediately: the power supply voltage in the working environment is too low, so that the main engine does not have enough power to tear when encountering larger materials. Check whether the power supply is normal, adjust the voltage in the workplace, so that it meets the voltage requirements of equipment work.
Tel : 0086-371-67666660 E-mail : shuguang_mill@163.com Cel : 0086-13523465141
