If the shredder fails during work, it not only poses a danger to the safety of the operator, but also affects the normal production. When using the device, the device and operation of the shredder should be carried out in strict accordance with the rules of the manual or the guidance of the professional.
Assembly of the shredding housing: 1. The bearing housing is installed on the wall of the machine base, and the fixing bolts are not tightened. Leave a gap of 2 mm between the bearing housing and the wall plate, and then fit the bearing, the clamping bushing, the retaining washer and the round nut in the fixed end and fasten them. 2. Secure the bearing housing and tighten the bolts. 3. Fill the bearing space of 1/4 of the potassium-based grease. 4. Install the bearing cap and tighten it.
Tel : 0086-371-67666660 E-mail : shuguang_mill@163.com Cel : 0086-13523465141
