The tooling of large shredders and the grinding of other tools are not the same. The cutter design of the large shredder is quite special. The design of the multi-claw blade makes it impossible to grind the grinder, and the single plane grinding of the insert causes the gap between the blades to be seriously affected. Other types of mechanical blades basically use a grinder to grind the plane or the edge portion.
So how do the tools of the large shredder be repaired? As a major component of the shredder, it is considered that the shredder blade often shreds dozens of waste products at the time of use, and the shredding complexity is very high, and the wear of the shredder blade edge is simply formed. Once the biaxial shredder tool is blunt, the shredding effect will become very poor. At this time, it is necessary to replace the spare tool and disassemble it with a blunt knife for grinding. The grinding of the shredder blade is not the same as the grinding of other knives. Other types of mechanical knives basically use a grinder to grind the plane or the edge portion, and the construction of the shredder cutter is special. The plan of the multi-claw blade makes it impossible to grind the grinder, and the single plane grinding of the blade will cause the gap between the blades to be seriously affected.
Tel : 0086-371-67666660 E-mail : shuguang_mill@163.com Cel : 0086-13523465141
