The metal shredder is also called the scrap iron shredder, the can shredder, the scrap shredder, the paint bucket shredder and so on. Shuguang Heavy Industry Co., Ltd. is a professional manufacturer of metal shredders. The metal shredder is developed by the technicians of the factory based on advanced technology and experience. Here are precautions you should pay attention to during the actual operation:
1.Forbid to operate without reading instructions.
After purchasing the equipment, you should carefully read the instructions for the shredder and familiarize yourself with the use and maintenance of the shredder. If you are not proficient, do not operate it yourself, so as to avoid unnecessary accidents, so it is the presence of professionals.
2. Forbid to operate in the machine
Check the crushing chamber for materials or iron blocks before starting the shredder. The shredder is not allowed to start with load. If the load starts, it will cause electrical trip or machine parts damage. Therefore, check the crushing chamber before starting. If there is material or iron block, it must be cleared before starting.
3.Forbid to work without wearing personal protective equipment.
There will be noise and pollution when crushing materials. This will cause great harm to our body in the long run. Therefore, we must take personal protective equipment before operation to reduce the damage to the crusher.
4.Forbid to use only maintenance
Maintenance is very important for the crusher. Long-term use will cause unnecessary wear on the machine. Therefore, check the wear level of the machine regularly, regularly maintain it, and regularly apply lubricant to make your machine play a bigger role.
5. Do not turn off the power when power is off.
Sudden power failure during use, remember to turn off the power, sudden calls will cause unnecessary damage. After the end of the work, you should also organize things well, turn off the power and leave, and develop a good habit of working.
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141
