At present, the tire shredding business is very profitable. Many people want to enter this industry, but they have never known the whole process of tire shredding. Shuguang Heavy Industry,as a professional tire shredder manufacturer with wholesale price equipment, briefly introduces the complete process of tire shredding.
1.Pre-Shredding: People usually use double shaft shredder or tire shredder to tear the whole tire down to smaller size.
2.Rasping:People usually use single shaft shredder to cut tire chips,and at the same time the steel wire is torn or rasped out of the chip.
3: Rough separation: This process separates the steel wire, fiber, and rubber.
4: Further size reduction: The following stages will depend on the particle size and volume per hour that needs to be made. This process can be condensed into just feeding the cracker mill directly after the rough seperation stage, but will require a much larger cracker mill.
5: Final separation: The material needs to be fed and removed last remaining bits of fiber.
6: Final screening: Screen out the materials of different sizes and return the overs to the further reduction stage.
7: Fine grinding: This stage is only necessary if you are manufacturing rubber powder. The 30 mesh material is fed into wet grinding machines that mix it with water to form a slurry then grind it to the final powder size required. It is then fed into a system to dry and package the material.
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141
