The tire shredder not only handles a wide variety of waste tire products, but also shreds other materials such as wood, waste plastics and more.
Shuguang is a manufacturer specializing in the production of scrap tire equipment. The scrap tire shredder uses a high-speed rotating rotor to tear long metal shavings off, and the high-speed rotating (about 1000 rev/min) spindles are connected in series. A multi-piece tool holder that rotates in conjunction with the spindle. The circular plate is surrounded by a fixed knife made of special steel and fixed on the cutter head. In addition, there are four sets of boring tools, and the boring tool rotates on its own small shaft. When the scrap crusher is working, the waste paint bucket and metal tire enter the machine from the inlet port, and are first torn into a large piece by a high-speed rotating knife and brought into the first-stage crusher, and mounted on the rotor disk. The knives used repeated impacts, smashing and grinding to separate the paint on the large piece of tire from the paper, rust, etc., and the material enters the secondary crushing chamber. As the gap is gradually reduced, the scrap tire is made dense. The tire mass, which exits the mesh opening from the bottom mesh, can be selected according to the size of the broken particles required by the tire chips.
Scrap tire shredder internal parts organization:
1) The main body shell is made of extra-thick steel plate, and the inner lining is made of high-manganese steel casting, which can be replaced;
2) The main rotor has 11 steel discs mounted on the horizontal axis, 6 pin shafts distributed around the circumference of the steel disc, and 10 hammer heads suspended in the axial direction;
3) The main shaft is supported by ball bearings, the circulating oil is forcibly lubricated and cooled, and a temperature sensor is installed;
4) The feeding port is equipped with a double-cylinder feeding device. The position is high and low, and rotates in the same direction. The large loose material can be gradually flattened and sent into the machine.
The scrap tire shredder we designed has low noise, no pollution, high crushing efficiency, scrap tire shredder discharge fine, uniform particles, our scrap tire shredder factory direct sales, the price is very favorable.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
