The jaw crusher uses the "chewing" effect of the jaws to break the stone. The stone between the two jaws is broken by shearing, splitting, extrusion, etc. High, more stereoscopic, no needles finished. Understand the working principle and structure diagram of the jaw crusher, and help the user to select the jaw crusher equipment with better quality. The principle of the jaw crusher is better understood, the structure is simpler, and it is in line with the user's simple and efficient processing. demand.
working principle
The crushing chamber of the jaw crusher presents a “v” shape, and the stone enters from the upper part of the “v”. Under the action of gravity and the downward movement of the moving jaw, it constantly flows to the lower part of the “v”, and the stone located in the lower part is constantly received. Extrusion, shearing, splitting and breaking into smaller particles. When the moving jaw is away from the static plate, it is at the bottom, and the stone that has been broken into qualified grain is discharged from the discharge port. When the moving plate is close to the quiet When the board is used, the stone material shrinks the volume of the material, and the materials are close to each other and squeezed. When the pressure rises beyond the strength that the material can withstand, the stone material will be broken, and the cycle processing is completed to complete the large-scale processing demand.
Operational skills
1. Before the operators are employed, they need to receive technical training from the system to establish a safety awareness and use the equipment reasonably and correctly.
2. When the equipment is in operation, it is strictly forbidden to peep into the machine from the upper part of the E-breaking machine, or perform any adjustment or overhaul, or put the hand into the feeding port to move the stone in the machine to prevent accidental injury.
3. The electrical equipment of the E-breaking machine must be in contact with the ground and the wires should be installed in the insulating tube.
4. During the use of the E-breaking machine, the equipment should be inspected and maintained regularly, which can effectively extend the service life of the equipment.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
