1. Mechanical use of single axle industrial shredder
In recent years, along with the rapid development of the large diameter PE plastic pipe material, how to effectively recycle the waste PE pipe and models are in the process of production has become a multitude of tubing manufacturers to solve the problem, some manufacturer by buying expensive or high power and low efficiency of the equipment to recycle, investment cost is too high, some manufacturer will waste work manually cut into small pieces and then broken, recovery efficiency is extremely low. How to effectively recycle large-caliber PE plastic waste is a key research subject of PE plastic manufacturer.
My company after years of concentrated study and draw lessons from the advanced experience of similar products abroad, through continuous improvement, has developed the large-diameter plastic pipe automatic tore up unit, the unit high degree of automation, high production efficiency, gives users the economically efficient way of recycling waste, plastic pipe diameter and the nose. All the recycled PE plastic that can be put into the mouth of the feeding box is not cut and decomposed, which can be torn apart and broken.
2.The structure characteristics of single shaft shredder
Single axle shredder is composed of motor, reducer, rotary knife shaft, imported movable knife, fixed knife, frame, stand, box body, oil pressure cylinder, oil pump and other main structure.
Frame determined dao is 1, rotating knife shaft is equipped with removable inserts moving knife, and the corners of the knife is a surface can use knife, remove the change point of view, after using a blunt rectangular with a blunt knife again after all around, after heat treatment the hardness of HRC60 ° above, so the service life is long, strong cutting ability, high capacity, the normal use of more than 900 tons to must sharpen, collocation of conveyor belt, the second section of the crusher and empty lose fan is used, along with all the of automation, rationalization and ShengLiHua. Effectively reduce labor intensity and improve the working environment.
