Compared with the traditional impact crusher, the contemporary impact crusher has overcome some of the previous problems, but the impact crusher still has some internal problems. In fact, the impact crusher may be generated inside the studio during the working process some problems.
1. The amount of vibration increases suddenly. When replacing or assembling the blower, the rotor is not well balanced. Reinstall the blower.
2. There is a knocking sound inside the machine, and the fasteners of the lining board are loose. After stopping, clean the crushing cavity to check the fastening of the lining board and replace the broken parts in the gap between the hammer and the lining board.
3. The bearing temperature is too high. Too much or insufficient grease; the grease is dirty; the bearing is damaged. Check whether the amount of grease is appropriate; replace the grease after cleaning the bearing; replace the bearing.
4. The output of the impact crusher is too large. The solution: adjust the gap between the front and rear impact frames or replace the liner and the hammer; adjust the position of the impact frame.
If you have any of the above problems during the actual operation of the impact crusher, you should stop the machine for inspection in time and do not let the consequences become more serious before thinking about solving them.
As a supplier with nearly 30 years' manufacturing, Shuguang Heavy Machinery also produces and sells hammer crushers, impact crushers, vertical shaft crushers, cone crushers, compound crushers, Raymond mills, high pressure mills. Powder machine, vertical mill, ultra-fine grinding machine, ball mill, double-shaft shredder and other heavy equipment crusher. Feel free to contact us for more details.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
