Operating shred confidential attention to the quality problem, the product is the key to survival is a enterprise, therefore henan huitong equipment for each a Industrial shredder factory products have been strictly checks, and make a commitment to quality, so that users can rest assured when buying products, the use of huitong road and bridge to the quality strives for the development of the Industrial shredder prices, let the customer in the same price to buy good quality products, the following staff as huitong manufacturer for everybody to tell me something about the Industrial shredder operation should pay attention to when using the problem? Let you avoid unnecessary losses.
1. Always check the connecting bolts, especially the square head bolts of the fixed tooth, in case of loose.
2. Lubricate 1-2 of each axle, size gear and special-shaped gear to ensure the lubricating oil of the inner lube of the bearing and reduce the breakdown of sleeve and gear.
3. The grain size shall not exceed the specified size, and the feeding shall be continuously uniform to prevent the phenomenon of blocking material.
4. Always check the temperature of the bearing, and the bearing temperature should not exceed 25to 30C at room temperature
5. The bearing slide of the moving roller should be cleaned regularly to remove dust and miscellaneous materials, and prevent the movement of the roller when the waste iron crusher goes into the nonbreaking material body.
6. When a power failure occurs, the power supply of the motor must be disconnected to prevent a sudden call accident. Then it is removed from the scrap metal crusher, which can prevent the arsenic machine from being cut off safely due to heavy load.
7, pay attention to the safety pin at work, found that the safety pin is cut off immediately after the cut off power supply, to prevent big pulley on the sleeve idling time is too long and cause excessive wear on the surface of the cooperation even holding shaft phenomenon and other accidents.
8. Operators must strictly implement safety technical operation procedures, eliminate the phenomenon of random operation, and prevent the occurrence of personal and equipment accidents.
