We are improving the production and quality of the wood shredder, which is to reduce the cost.
The method of improving the output of wood shredder:
1. Guarantee the uniformity of feed belt, too fast or too slow, easy to cause the lumber mill jam or empty capacity.
2. In the process of pulverization of wood, the high degree of fine powder is easy to cause a lot of waste and waste is the main reason for the decrease of production.
3. The selection of brittle materials is easier to smash than hard materials. Materials with less fiber content are more easily broken than those with more fiber.
4. Materials with low water content and low water content are easily crushed, and the higher water content is more difficult to crush. Taking logs as an example, with water content increased from 13 percent to 14.5 percent, output would fall by 20 percent. Therefore, the moisture content of the crushed material should be less than 13%. And from the storage point of view, the water content of crushing materials should be less than 13%.
5. in the case of other conditions being equal, the high quality blade cutting more thoroughly, more efficient, longer service life, and poor quality of blade, under the high strength work will fever softening, deformation. Thus greatly reduces the crushing ability of the wood shredder
