Plastic shredder is a recycling of waste plastic products, rubber equipment recycling equipment, which is a preliminary understanding of plastic shredders, then how to operate it to achieve the best results?
Plastic shredders in the operation, the operator should leave the tangential direction of rotation of the hammer, are not allowed to wear gloves to feed, hands can not go beyond the safety line, not to use iron and stick instead of hand feeding. Shredder and power unit should be installed firmly, if the plastic shredder long-term fixed operation, it should be fixed on the cement foundation, if the plastic shredder is mobile operation, the unit should be installed in the machine made of angle iron, And to ensure that the power machine and shredder pulley at the same turning plane. Plastic shredders to check the various parts of the fastener after the installation of the injury, if loose to be tightened at the same time to check the tightness of the belt is appropriate. Before starting the shredder, first turn the rotor by hand to check whether the lower claw, the hammer piece and the rotor are flexible and reliable, whether there is a collision in the shell, whether the rotation direction is the same as the direction of the machine head, And shredder lubrication is good. Do not change the pulley casually to prevent the rotation speed is too high to blast the shredding chamber or too low speed to affect the working efficiency of the shredder.
