Tire shredder maintenance and other major repair and overhaul and other content, the core of all the major components of the engineering shredder disassemble for maintenance and repair, but the modern is strictly in accordance with the requirements of the process of assembly, the traditional large demolition Large unloading maintenance simply can not guarantee the assembly accuracy. With the widespread use of electronic technology in engineering shredders, sensitive electronic components can be easily damaged during disassemble and maintenance, thus affecting the serviceability of the tire shredder.
Furthermore, the quality of the equipment is increasing day by day, and the failure rate in use is relatively low. Many minor faults can be avoided if they are properly maintained as required. Some maintenance personnel still focus on the use of light maintenance, fault repair understanding misunderstanding, that the equipment does not require maintenance without failure, to do maintenance in advance, both costly and time-consuming, so that equipment there is the potential for failure will increase, so that Equipment technical performance gradually reduced.
There is a lot of hydraulic oil lubrication problems, the hydraulic system should be used when filling the filter device, so even if there are some hard to find hard impurities will be found because of the presence of the filter out. Not only pay attention to the cleaning of fuel tools, but also pay attention to the cleanliness of the storage environment, to maintain a good environment to prevent impurities from entering the trouble of cleaning up. Hydraulic system fuel tank refueling filter must not be removed before refueling, as long as this, to the hydraulic system laid a security risk.
