The shredder blade can be said to be the source of life for the shredder. In the accessories of the shredder, the shredder blade is a fragile accessory, and the quality of the shredder blade can directly affect the efficiency of the shredder. And the final output of the machine. This shows how important the shredder blade is to the shredder.
The shredder blades are pided into single-axis shredder blades and multi-axis shredder blades, wherein the multi-axis shredder blades have two axes and two types of circumference. To a certain extent, uniaxial shredder blades and double shaft shredder blades are interchangeable and can be repaired. Here we will focus on the introduction of a single axis shredding saw blade.
The cutting part of the uniaxial shredder consists of a knife roller, a knife, a fixed knife and a screen. The minimum installation clearance between the knife and the fixed knife of the single shaft shredder is 0.1 mm, and the knife roller rotates at a high speed, making The cutting of the knife and the stationary knife forms a cut, and then through one cutting, if the size of the material is smaller than the aperture of the screen, the material will be discharged from the mesh, otherwise the material will be cut several times in the knife box until reaching the discharge size. Can only discharge.
The uniaxial shredder is equipped with a detachable knife, which is very easy to maintain. The uniaxial shredder can be forced to feed through the feeder, which can be done more efficiently and the production efficiency is also promoted. The single shaft shredder blade equipment is CE certified and strictly complies with European safety standards. In the screen area, the single-axis shredder can be easily removed and the discharging particles can be changed according to their own needs. The single axis shredder has a shock absorber, which is available on both the motor and the reducer, and can be reduced in impact. The uniaxial shredder has an integral cutter roll, which can effectively guarantee the cutting clearance between the cutter and the stationary cutter. The single-axis shredder has a sealed bearing design that is waterproof and dust-proof, and also extends the life of the bearing. The PLC monitors the motor current of the single-axis shredder and, in the event of a load overload, the tool shaft will be reversed automatically to protect the motor. The single-shaft shredder with low melting point material can be equipped with a knife shaft cooling system, which can prevent the material from being scorched due to the high temperature.
