The metal shredder is mainly used in processing industries such as scrap metal, household waste, ton bags, rubber, tires, paint barrels and other wastes to recycle and reuse resources. The advantages of metal crushers for various types of shredders are realized. In one, with high output, low noise, shredded than large, price concessions, in today's environmental protection machinery industry shine. In the process of using the metal crusher, the problem of non-uniform discharge occurs. How to deal with the problem of non-uniform discharge of the metal shredder? The following analysis of what factors led to the emergence of metal shredder uneven discharge problems.
First of all, because the voltage of the metal shredding machine is unstable, it will affect the stability of the motor, causing problems such as non-uniform rotation speed, rapidity, etc., which in turn causes the discharge to be non-uniform. When the feed is not uniform, it is likely to cause blockage. The cavity is stuffed with unfinished materials. In severe cases, a large amount of plugging may bring down the machine or increase the temperature of the motor.
Followed by the metal shredder motor is not stable. When the voltage is stable, with the change of the force that the transmission bears, the original fixed point of the motor will be displaced and the base screw will loosen. Therefore, it is always necessary to check whether this part is intact. First, the current shredder industry standard is not standardized, and the specifications of the supporting shredder blades are also numerous. The shredder produced by the same manufacturer may use five or six different types of shredder cutters. The method allows large-scale batch production of shredder blades.
