As a mechanical equipment used to tear up the waste plastic, the plastic rip machine has been favored by the majority of users because of its energy saving and environmental protection and greatly reducing the waste of waste plastics. But after the use of the plastic tearing machine for a period of time, it will be out of the correct operation method and regular maintenance. There are some malfunctions, such as vibration during production, so what is the result? The following is a professional manufacturer to take the lead to analyze the causes of the vibration.
The most common reason for the vibration of a plastic tearing machine in production is that the rotor is not concentric. At this time, you can move the motor to the left or right or add a cushion under the motor to adjust the concentricity of the rotor. Second, the anchor bolt is loose, and then can not fix the rip machine when it works, so that the vibration occurs when the tear is broken, when the bolt is fixed, it can work normally. In the end, if the blade is broken or there are impurities that can not be tore, if the blade is not found in time, it will be good to shake, and it should be dealt with in time so as not to cause more serious consequences. Therefore, when the shredder is vibrant, it is necessary to make a check first. After that, the right remedy can solve this problem most effectively.
