The shredding machine assembly is a complicated process, which includes the assembly of parts according to the requirements of assembly drawings, the process of assembling into a whole machine, and the whole process of the adjustment of the assembly process and the test machine after assembly. The following is the question that the structure of the wood shredding machine, the following will talk about the problems encountered in the construction and maintenance of the wood shredder.
Before the assembly and shredding machine is officially started, it is necessary to clean the rust, oil, dust and so on the mechanical parts. When cleaning, the brush can be used in diesel, kerosene or gasoline, or clean by clean cloth. It is necessary to pay attention to the use of organic solvents for cleaning. During the cleaning process, the surface of the part of the shredding machine is prevented from scratching, the oil holes on the bearing box must be dredged, and then the clean gauze or the cotton silk is stuck in the mouth to prevent the contamination from entering. For example, the center of gravity of the pulley, gear, and shredding machine must coincide with the center of rotation. Otherwise, the shredding machine will affect the use of the mechanical equipment in the operation. After the shredding machine is finished, check the wrench and other tools are left in the shredding chamber. After the power is turned on, the machine opens 3~4 seconds first, without abnormal sound or vibration in normal operation.
