Hammer crusher oil immersed heater: The important role of the oil immersed heater is to ensure the normal flow of lubricant when the crusher works in cold weather. When the oil temperature is lower than 27°C, cut off the heater. When the temperature is higher than 54°C alarm through the electrical contact thermometer. The oil temperature can be adjusted by adjusting the water supply to the cooler. When the air is cold, the air-cooled radiator can also be connected through the temperature switch.
Hammer crusher cooler: The commonly used coolers are water-cooled and air-cooled. The lubricating system must be equipped with a chiller, whose function is to cool the lubricating oil above 54°C. Do not use a lubricating oil cooler when the oil temperature is below 38°C. Hammer crusher coolers provide the best cooling and longest service life. Regular cleaning not only improves the heat transfer efficiency of the cooler but also eliminates the possibility of causing corrosion and impeding the smooth flow of deposits in the water and extending the life of the cooler. Through the thermometer installed at the inlet and outlet of the cooler, it is determined whether it should be cleaned. If the temperature at the cooler inlet and outlet is very small, it means that the cooler may have been clogged or corroded by sediments and must be cleaned. In order to keep the lubrication running, the lubricant enters the oil supply line through the safety valve.
