The micro powder pulverizer will have some minor problems in the daily work. When you encounter problems, please do not panic and must be resolved calmly. Find the maintenance personnel of the micro powder mill or call the seller to inquire about the solution before the cause is determined and resolved. Do not operate.
Micro powder pulverizer oil leakage is a normal phenomenon, many people in this situation will be particularly afraid of fear of injury, in fact, micro powder oil leakage is a miscellaneous operation or a long time to make some parts of the friction caused by a long time Somewhere bigger gaps cause oil spills, and machine aging also causes oil spills. It's not a big problem, and it can be solved in time.
Micro powder pulverizer oil leakage mainly comes down to two cases, one is the oil seal damage caused by oil spills, there is a case of lubricating oil is not qualified, the viscosity is too high or too low. Many parts of the micro powder mill use advanced oil seals. If the oil seal is damaged, or when the oil is refueled, the high pressure oil gun will cause the oil seal to rupture, which is the main factor of oil leakage. In addition, the oil viscosity is too large, the oil pump will not go, the oil will cause the sleeve bearing lack of oil heating, resulting in bearing damage and oil leakage. Lubricating oil is too thin and its viscosity is not enough to make it overflow. In order to ensure that the micro powder pulverizer will not leak oil, in addition to ensure daily correct maintenance, but also to understand the device, the correct addition and use of lubricating oil to avoid oil pulverizer mills occur. The customer should comply with the specification of the mill to strictly comply with the specification requirements for refueling. The marking on the oil and the viscosity should be controlled to ensure safe and smooth production of the equipment.
