Because the working environment of the shredder is very bad, there are often unexpected events in production and use. When the metal shredder suddenly stops working, we must keep calm and do not blindly repair it.
If a sudden shutdown occurs, the power supply must be cut off immediately to avoid other accidents in operation and production. To see if there is blockage in the discharge port, the operator must strictly follow the instructions, not blindly in order to rush to the shredder without stopping feeding, to avoid exceeding the machine's bearing capacity. If material clogging occurs, it is necessary to stop the machine in time to remove the clogging material from the discharge port of the shredder to ensure smooth discharge. Often inspect parts: In the normal work of the machine, it is necessary to inspect the machine parts, such as the elasticity of the triangle belt, bearing wear and its heating, tool wear, line aging, breakage and other issues. When the voltage is too low, the power supply should be cut off immediately: the power supply voltage in the working environment is too low, so that the main engine has not enough power to break when it encounters the larger material. Check the power supply is normal, can adjust the workplace voltage, so that it meets the voltage requirements of the equipment.
Tel : 0086-371-67666660 E-mail : Admin@sgzgchina.com Cel : 0086-13523465141
