What are the important factors that affect the balance of the shredder rotor?

An important factor influencing the balance of the shredder rotor is the blade, which passes through the interchangeable blades and positions the two blades flat in two mutually symmetrical orientations. It is necessary to adjust the gravity of the blade so that the gravity of the blade is balanced, the gravity of each row in the circumferential direction of the rotor is flat, and the axial gravity is evenly placed, so that the hammer can work to reach the balance requirement and avoid the oscillation. Special care should be taken when replacing new blades. Strengthening the smoothness, smoothness, and smoothness of the seal can reduce the conflict resistance. Cooling can remove the conflict heat and suppress the bearing temperature rise. For the characteristics of high speed, heavy load and high temperature rise of the hammer, the aluminum disulfide composite calcium-based smooth grease smooth bearing should be used. The smooth grease is suitable for use under 140 degrees, high temperature, high speed and heavy load. Its function is superior to general composite calcium base grease, its high temperature resistance, abrasion resistance and extreme pressure resistance, and its service life is far superior to general calcium. Base grease. Because the hammer breaks under harsh environmental conditions, the conflict of smooth grease is lost. Smooth grease should be added once every 8 hours, oil should be changed every three months, and the bearings and seals should be cleaned with gasoline or fire oil. And the cover, timely replacement of the labyrinth seal sleeve and cover with excessive wear gap on the bearing housing.

Tel : 0086-371-67666660  E-mail : shuguang_mill@163.com  Cel : 0086-13523465141