1. The tire shredder machine should be placed in the ventilation position to ensure the heat dissipation of the motor and prolong its life.
2. The bearings should be lubricated regularly to ensure the lubricity between the bearings.
3. Regularly check the tool screw. After using the new tire shredder for 1 hour, use the tool to fasten the moving knife and fix the knife's screw to strengthen the fixing between the blade and the tool holder.
4. In order to ensure the sharpness of the tool cut, the tool should be inspected frequently to ensure its sharpness and reduce unnecessary damage to other components caused by the blunt blade.
5. When changing the tool, the gap between the movable knife and the fixed knife: 0.8MM for the crusher of 20HP or more is better, and 0.5MM of the crusher of 20HP or less is better. The thinner the regrind, the larger the gap can be.
6. Before the second start, the remaining material in the machine room should be removed to reduce the starting resistance. The inertia cover and the pulley cover should be opened periodically to remove the gray outlet under the flange, because the tire shredder chamber discharges the powder into the shaft bearing.
7. The machine should be well grounded.
8. Regularly check whether the belt of the tire shredder is slack and adjust it in time.
If you insist on regular maintenance and timely maintenance, you will be able to find out the effect in the work of the tire shredder after a long period of time. We guarantee that the tire shredder equipment will run more smoothly, the production efficiency will be higher and higher, and the service life will be higher. It will be much longer than expected.
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141
