Motor is a very important part of tire shredder, and easy to heat, coupled with the large workload of the shredder, usually the production time is continuous, so motor heating is a normal phenomenon, but as the temperature of the weather rises, the heating speed of the motor will be accelerated. Therefore, when the problem comes, we should first find out the reason and then try to solve it. The hot weather is one of the problems, but there are still many problems which belong to the operation and the internal of the tire shredder equipment. What are the specific problems?
1. The air gap between the stator and the rotor of the motor is very small, which simply causes the stator and the rotor to collide. The simpler way to deal with it is to insert the end cover.
2. The abnormal oscillation or noise of the motor causes the heat of the generator. Oscillation not only produces noise, but also generates rated load. .
3. Bearing operation is abnormal, it must form motor heating. Whether bearing operation is normal or not can be judged by temperature. The bearing end can be checked by hand or thermometer to determine whether the temperature is within the normal range.
4. If the voltage of the power supply is too high and the excitation current increases, the motor will overheat.
5. Material enters the inside of the motor, which decreases the insulation of the motor, thus lowering the allowable temperature rise of the motor. The machine should be shut down immediately to remove foreign bodies.
Above all can be regarded as the cause of motor heating, always observe the working state and temperature of the motor, if the temperature is too high, stop processing immediately, and wait for the cooling of the motor to start again.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
